> ## Content Index
> Fetch the complete content index at: https://www.machinerymatters.com/llms.txt
> Use this file to discover other available public pages before exploring further.

# The Complete Pressure and Head Series
- URL: https://www.machinerymatters.com/pressure-and-head-series/
- Published: 2026-10-05T02:37:25.000Z
- Updated: 2026-11-15T22:36:59.000Z
- Description: Series guide. The pressure and head series in reading order: three articles, a calculator, and the knowledge check, each with a summary and a figure, on absolute, gauge, and vacuum pressure, manometric units, site elevation, the head of liquids, and the total dynamic head of a pump.
- Author: Editor
- Tags: Fluid Mechanics, Centrifugal Pumps, Series, #series-pressure-and-head

Jump to:[Articles](#ss-articles)[Calculators](#ss-calculators)[Knowledge check](#ss-knowledge-check)

Pressure is force per unit area, and a pressure value cannot be accurately interpreted until its zero reference is known: a perfect vacuum for absolute pressure, and the local atmospheric pressure for gauge pressure and vacuum. The head of a liquid is its energy per unit weight, expressed as the height of a column of that liquid, and centrifugal pump performance is stated in head rather than in pressure. This series covers pressure in liquids and gases and the head of liquids, beginning with pressure and its measurement and finishing with the total dynamic head of a pump. A calculator is provided with the articles to assist understanding and to help practitioners with real plant readings. A knowledge check is available at the end for those who want to confirm what they learned.

The articles are free to read and the knowledge check is free to take. The calculator is available to free subscribers.

## Articles

1. [Pressure and Its Measurement](https://www.machinerymatters.com/pressure-and-its-measurement/)Article  
Pressure as force per unit area; absolute, gauge, vacuum, and differential pressure; the pressure exerted by a liquid column; the manometric units in plant use; the density and specific gravity of liquids; atmospheric pressure and its fall with site elevation; and how a pressure indicator establishes its reference. The worked example compares the absolute pressure under a 20 ft column of water in Houston and in Denver.  
U-tube manometer Process gas P Patm h Manometer liquid Barometer Near-perfect vacuum Patm Mercury h
2. [Liquid Head: Pressure, Velocity, and Elevation Head](https://www.machinerymatters.com/liquid-head-pressure-velocity-and-elevation-head/)Article  
Head as the mechanical energy of a liquid per unit weight, expressed as a height of the liquid; the static pressure of a flowing liquid and how a pressure tap’s location, orientation, and construction affect its reading; pressure head for liquids of any specific gravity; stagnation pressure, the Pitot tube, and velocity head; and elevation head and the datum. Worked values convert 100 psi to feet of head for liquids of specific gravity 0.85 and 1.1, give the velocity heads at 5, 10, and 15 ft/s, and show the elevation and pressure heads of an open tank of water summing to the same value at every point.  
Datum Wall tap Tube facing the flow v z P/ρg v²/2g
3. [Total Dynamic Head](https://www.machinerymatters.com/total-dynamic-head/)Article  
The total head of a flowing liquid as the sum of its elevation, pressure, and velocity heads; how the elevations of a pressure tap and its indicator affect the head calculation; and the total dynamic head of a pump, from the total heads at its suction and discharge taps, on the gauge or the absolute basis. The worked example calculates the total dynamic head of a pump handling 500 gpm of a liquid of specific gravity 0.85 from its gauge readings, indicator elevations, and pipe sizes.  
Datum Datum (a) Indicator above its tap ztap zind Ptap Pind (b) Indicator below its tap ztap zind (c) One 90° bend ztap zind (d) Bends, indicator level ztap zind (e) Loop in the line ztap zind (f) Gas at a high point ztap zind Gas

## Calculators

1. [Pump Total Head Calculator](https://www.machinerymatters.com/pump-total-head-calculator/)CalcSubs  
Companion tool to [Total Dynamic Head](https://www.machinerymatters.com/total-dynamic-head/).  
Returns the total heads at a pump’s suction and discharge taps and its total dynamic head, for a liquid of any specific gravity or density, from the flow and each pressure indicator’s reading, elevation, and pipe size. Readings may be gauge, absolute, or vacuum, with the site’s atmospheric pressure estimated from its elevation or entered directly, in US units or in SI with kPa or bar.  
Pump Datum Suction indicator Ps Discharge indicator Pd zs zd Ds Dd 3Ds 2Dd 2Dd Q

## Knowledge check

1. [Pressure and Head Knowledge Check](https://www.machinerymatters.com/pressure-and-head-knowledge-check/)Test  
Fifteen open-book, auto-scored questions on application, calculation, and judgment across the series, each with lookup links to the articles. Answers are saved as they are entered and submitted once at the end for a score, a per-article breakdown, explanations for any question answered incorrectly, and a printable certificate at 80 percent or better.

Click any figure to enlarge it. The [Library](https://www.machinerymatters.com/library/) lists every article and tool on the site by topic.

×